MR. JOHN PASCHKEWITZ


John Paschkewitz has over 34 years experience in product assurance, testing, reliability and sustaining engineering in several industries including hydraulic truck cranes and excavators, military and civil aircraft airframe and avionics, photocopiers, elevators and escalators, heaters, temperature sensors and controls. From a supplier perspective, this includes ensuring component reliability for customers in the semiconductor equipment, medical device, commercial cooking equipment, and diesel emissions control industries.

He holds a B.S. in Mechanical Engineering and a Masters in Engineering Professional Development from the University of Wisconsin – Madison and a M.A. in Business Management from Central Michigan University. He is a registered Professional Engineer and an ASQ Certified Reliability Engineer. He is a senior member of ASQ, and a member of SAE and ASME.
NEW SEMINARS
Length Course Title Instructor
1 day 17. Ensuring Reliability in Lean Product Development John Paschkewitz
1 day 18. Advancing HALT & HASS:
Moving to Comparative Limit Anaylsis		 Kirk Gray
3 hours 19. How to Effectively Implement DFR & DFSS
in a Systems Engineering Environment		 Thimmiah Gurunatha, Peng.
3 hours 20. Thunder & Lightning Accelerated Testing
in a Systems Engineering Environment		 Thimmiah Gurunatha, Peng.
3 hours Gage R & R or Measuring Systems Analysis Thimmiah Gurunatha, Peng.
3 hours Rainbow SPC Thimmiah Gurunatha, Peng.
3 hours Improving Test Effect. and Effic. using Orthogonal Arrays Thimmiah Gurunatha, Peng.
3 hours Design for Six Sigma Tools to Promote the Development of World Class Product Requirements Sam Keene
3 hours 21. Quickest Way to Reliability is to
HALT and go FISHing		 Howard Cooper, DFSS BB, DFR
2 hours 22. Understanding Shock and Vibration Alec Feinberg, Ph.D.
3 hours Physics of Failure Methods for Building-in Reliability into Products Abhijit Dasgupta, Ph.D.
3 hours 24. Intro to Design for Manufacturability Aldo Fucinari
3 hours 25. Microelectronic Pkg Issues and Failure Analysis Tom Green
CLASSES ON RELIABILITY
Length Course Title Instructor
2 days 1. Introduction to Reliability & Weibull Analysis Chet Haibel, M.S.E.E.
2 days 2. HALT & HASS + Workshop Kirk Gray
2 days 2. HALT & HASS + Workshop Chet Haibel
2 days 2a. Mastering HALT & HASS Kirk Gray
2 days 2a. Mastering HALT & HASS Chet Haibel
2 days 4. Demonstrating Reliability Chet Haibel
4 days 6. Accelerated Test Data Analysis Wayne Nelson, Ph.D.
SPECIFIC TECHNICAL CLASSES
Length Course Title Instructor
2 days 7. Physics of Failure Abhijit Dasgupta, Ph.D.
2 days 8. Lead-Free Solder Joint Reliability Jean-Paul Clech, Ph.D.
1 day 9. Medical Device Risk Management Chet Haibel, M.S.E.E.
2 days 14. Cooling Techniques for Electronic Equipment Steve Carlson
2 days 15. Preventing Shock and Vibration Failures Steve Carlson
2 days 16. Preventing Thermal & Vibration Failures Steve Carlson
CUSTOM SEMINARS OFFERED
Length Course Title Instructor
1 day 12. Integrating Adv. Quality, Reliability, Durability
(QRD) Tactics with Accelerated Product Dev.		 James G. McLeish, M.S.
3 days 13. HALT & HASS and Classical Rel. Methods Integrated Chet Haibel, M.S.E.E.

Areas of interest and expertise include:

Reliability Requirements definition
Verification and Validation planning and testing
HALT and HASS applied to electronic, electrical and mechanical components
Failure analysis methods and lab operation
Reliability test lab planning and operation
Design for reliability and GD3 (Good Design, Good Discussion, Good Dissection)
Design Review by Failure Modes / Design Review by Test Results (DRBFM / DRBTR) tailored to the needs of different industries as a complement to or substitute for FMEA, particularly outside of the automotive and aerospace industries where requirements for FMEA are less structured.
Sustaining engineering and evaluation of fielded products
Integrating reliability into Lean Product Development
Application of reliability analysis software tools for Weibull and life data analysis, quantitative accelerated life test analysis, and design of experiments planning and analysis
Practical approaches to quality, reliability and durability assurance from both an OEM and supplier perspective
CLASS REGISTRATION
Check Mailed
Payment at Seminar
Visa or Mastercard
(for your security, please fax or phone your credit card information after registering)

Seminars fees for North America:
1 day - $695;
2 days - $1195; 3 days - $1595.
Please contact Hobbs Engineering for Webinar pricing.
Click here for the long Registration Form
Contacts:
Hobbs Engineering Corp.
4300 West 100th Ave,
Westminster, CO 80031
Tel: 303-465-5988
Fax: 303-469-4353
learn@hobbsengr.com

©2011 Hobbs Engineering Corp.